Data and File Management
R&S
®
RTM20xx
226User Manual 1317.4726.02 ─ 01
Note: To save the device settings several times by pressing simply the PRINT key,
assign the "Device Settings" to the PRINT key as described in chapter 13.2.2.1,
"Configuring the PRINT-Key Behavior", on page 224.
To load device settings
1. Press FILE > "Device Settings > Load".
A file explorer is displayed.
2.
If necessary, select the storage device and directory described in "To select the stor-
age directory" on page 218.
3. Select the file that contains the device settings. Use the "Navigation" knob to scroll
through the files.
4. Press "Load".
The saved settings are loaded to the R&S RTM.
13.2.3.2 Device Settings Menu
With FILE > "Device Settings" you open a menu to manage instrument configuration files.
Save............................................................................................................................226
└ Setup & Label...............................................................................................226
Load............................................................................................................................226
Import/Export Device Settings.....................................................................................227
Memory Usage............................................................................................................227
Default sett..................................................................................................................227
Save
Opens the "Save" menu, see "Save Menu" on page 220.
In addition to the common save functions, specific functions are available.
Setup & Label ← Save
Saves the the device settings together with the label list to the selected storage directory
in one file. The used file name is displayed when storage is completed.
This function is available if option R&S RTM-K1 or K3 is installed (protocols I
2
C, LIN,
CAN), and a label list was loaded and applied to the protocol data.
When you load a setting file with label list to an instrument, the label list is loaded together
with the instrument settings. A previously loaded label list will be overwritten.
Load
Opens the "Load" menu, see "Load Menu" on page 221.
Saving and Loading
To Next Page
Loading...
