Preface
R&S
®
SMW-K144
7User Manual 1178.8013.02 ─ 06
1 Preface
1.1 About this Manual
This user manual provides all the information specific to the 5G New Radio option.
All general instrument functions and settings common to all applications and operating
modes are described in the main R&S SMW user manual.
The main focus in this manual is on the provided settings and the tasks required to
generate a signal. The following topics are included:
●
Welcome to the 5G New Radio option
Introduction to and getting familiar with the option
●
About the 5G New Radio option
Background information on basic terms and principles in the context of the signal
generation
●
5G New Radio Configuration and Settings
A concise description of all functions and settings available to configure signal gen-
eration with their corresponding remote control command
●
Remote Control Commands
Remote commands required to configure and perform signal generation in a
remote environment, sorted by tasks
(Commands required to set up the instrument or to perform common tasks on the
instrument are provided in the main R&S SMW user manual)
Programming examples demonstrate the use of many commands and can usually
be executed directly for test purposes
●
List of remote commands
Alphabetical list of all remote commands described in the manual
●
Index
●
Abbreviations
●
List of documents and reference information
1.2 Documentation Overview
This section provides an overview of the R&S SMW user documentation. Unless speci-
fied otherwise, you find the documents on the R&S SMW product page at:
www.rohde-schwarz.com/manual/smw200a
Documentation Overview
To Next Page
Loading...