Rohde & Schwarz SMW-K144 - Modulation; PUSCH Settings; Rboffset

5G New Radio Configuration and Settings
R&S
®
SMW-K144
75User Manual 1178.8013.02 ─ 06
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:FRC:
MODulation? on page 205
Payload Size ← FRC settings
Indicates the payload size of the selected FRC.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:FRC:
PASize? on page 205
RB Offset ← FRC settings
Sets the RB offset for the selected FRC.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:FRC:
RBOFfset on page 205
PUSCH settings
Access: "User/BWP Settings > UL BWP Config > PUSCH".
The dialog comprises the DMRS settings, divided per DMRS-mapping type and as
defined in TS 38.211.
Config Type ← PUSCH settings
Sets the configuration type (type 1 or type 2). It thus defines the mapping of the
demodulation reference signal (DMRS) to the physical resource elements in the fre-
quency domain, as defined in TS 38.211.
Users/BWPs Settings