Rohde & Schwarz SMW-K144 - Payload Settings

5G New Radio Configuration and Settings
R&S
®
SMW-K144
104User Manual 1178.8013.02 ─ 06
Example:
Select:
●
Restrict to Search Space > "On".
●
For "Scheduling > CORESET > General" > Aggregation Level = "1", select Max
Candidates = "2".
●
Select "Scheduling > CORESET > Payload" > Aggregation Level = "1" and Candi-
date = "1"
Observe the CCE Index ("Scheduling > CORESET > Payload" > CCE Index). The
value is set automatically.
Aggregation Level ← Search Space
Displays the possible aggregation levels, as defined in TS 38.213.
For each aggregation level, you can set the maximum number of candidates that are
monitored, see Max Candidates.
"Aggregation level" Number of CCEs
1 1
2 2
4 4
8 8
16 16
For more information, see "Search Space" on page 103.
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DMRS:SPACe<s2us0>:AGGLevel?
on page 235
Max Candidates ← Search Space
Sets the maximum number of candidates allowed for the selected aggregation level, as
specified in TS 38.213.
For more information, see "Search Space" on page 103.
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DMRS:SPACe<s2us0>:MAXCandidate
on page 235
5.6.2 Payload Settings
Access:
1. Select "5G New Radio > General > Link Direction > Downlink".
2. Select "5G New Radio > Scheduling".
CORESET Settings