5G New Radio Configuration and Settings
R&S
®
SMW-K144
57User Manual 1178.8013.02 ─ 06
Cell
Selects/indicates to which carrier/cell the settings apply.
Remote command:
via suffix at CELL<ch>
BWP
Select the bandwidth parts (BWP) whose settings are displayed for configuration.
There are one or more BWPs, as set with the parameter "User/BWP Settings > DL
BWPs" > Number of DL/UL BWPs.
Remote command:
via suffix at BWP<dir0>
5.3.4.2 PDSCH Settings
Access:
► Select "User/BWP Settings > DL BWP Config > PDSCH".
The dialog comprises the DMRS and PTRS settings, divided per DMRS-mapping
type A and B, as defined in TS 38.211 and TS 38.214.
For description of the remote-control commands, see Chapter 8.10.1, "PDSCH
Commands", on page 188.
Users/BWPs Settings
To Next Page
Loading...