Rohde & Schwarz SMW-K144 - UCI Settings

5G New Radio Configuration and Settings
R&S
®
SMW-K144
94User Manual 1178.8013.02 ─ 06
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PHYSbits? on page 221
Transport Block Size
Indicates the resulting transport block size (TBS), calculated for the selected modula-
tion and coding scheme ("I_MSC").
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PDSCh|PUSCh:CCODing:TBSize?
on page 227
Redundancy Version Index
Sets the redundancy version index.
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PDSCh|PUSCh:CCODing:RVINdex
on page 227
5.5.5 UCI Settings
Access:
1. Select "Users/BWPs > Properties > USCH Channel Coding > On".
2. Select "Users/BWPs > UL BWP Config > PUSCH UCI > State > On".
3. Select "Scheduling > User x BWP x > Content > PUSCH > Settings > Config".
4. Select "UCI".
PDSCH/PUSCH Settings