Rohde & Schwarz SMW-K144 - Page 227

Remote-Control Commands
R&S
®
SMW-K144
227User Manual 1178.8013.02 ─ 06
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PDSCh|PUSCh:CCODing:
TCRate?
Queries the target code rate for the selected modulation and coding scheme.
Return values:
<TargetCodeRate> float
Range: 0.0 to 1.0
Increment: 0.001
*RST: 0.0
Example: See Example "Configuring the PDSCH incl. PTRS settings"
on page 153.
Usage: Query only
Manual operation: See "Target Code Rate" on page 93
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PDSCh|PUSCh:CCODing:
TBSize?
Queries the resulting transport block size (TBS).
Return values:
<TransBlockSize> integer
Range: 0 to 3824
*RST: 0
Example: See Example "Configuring the PDSCH incl. PTRS settings"
on page 153.
Usage: Query only
Manual operation: See "Transport Block Size" on page 94
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PDSCh|PUSCh:CCODing:
RVINdex <RVIndex>
Sets the redundancy version index.
Parameters:
<RVIndex> integer
Range: 1 to 2
*RST: 0
Example: See Example "Configuring the PDSCH incl. PTRS settings"
on page 153.
Manual operation: See "Redundancy Version Index" on page 94
PDSCH/PUSCH Commands