Rohde & Schwarz SMW-K144 - Number of SRS Antenna Ports

5G New Radio Configuration and Settings
R&S
®
SMW-K144
80User Manual 1178.8013.02 ─ 06
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:UCI:
HARQ:OFF0 on page 211
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:UCI:
HARQ:OFF1 on page 211
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:UCI:
HARQ:OFF2 on page 211
SRS
Access: "User/BWP Settings > UL BWP Config >SRS".
Number of SRS Antenna Ports ← SRS
Sets how many antenna ports (AP) are used for every SRS transmission.
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:CELL<st0>:UL:BWP<dir0>:SRS:
NAPort on page 212
Users/BWPs Settings