5G New Radio Configuration and Settings
R&S
®
SMW-K144
51User Manual 1178.8013.02 ─ 06
(P)DSCH/(P)USCH Data Source
Depending on the selected "Link Direction", selects the PDSCH/PUSCH data source.
If channel coding is enabled, the parameter sets the DSCH/USCH data source.
The following standard data sources are available:
●
"All 0, All 1"
An internally generated sequence containing 0 data or 1 data.
●
"PNxx"
An internally generated pseudo-random noise sequence.
●
"Pattern"
An internally generated sequence according to a bit pattern.
Use the "Pattern" box to define the bit pattern.
●
"Data List/Select DList"
A binary data from a data list, internally or externally generated.
Select "Select DList" to access the standard "Select List" dialog.
– Select the "Select Data List > navigate to the list file *.dm_iqd > Select" to
select an existing data list.
– Use the "New" and "Edit" functions to create internally new data list or to edit
an existing one.
– Use the standard "File Manager" function to transfer external data lists to the
instrument.
See also:
●
Section "Modulation Data" in the R&S SMW user manual.
●
Section "File and Data Management" in the R&S SMW user manual.
●
Section "Data List Editor" in the R&S SMW user manual
Remote command:
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:DSCH:DATA on page 184
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:DSCH:DLISt on page 185
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:DSCH:PATTern on page 185
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:USCH:DATA on page 184
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:USCH:DLISt on page 185
[:SOURce<hw>]:BB:NR5G:UBWP:USER<ch0>:USCH:PATTern on page 185
5.3.3 DL/UL BWPs Settings
Access:
1. Select "5G New Radio > General > Link Direction > Downlink".
Users/BWPs Settings
To Next Page
Loading...