5G New Radio Configuration and Settings
R&S
®
SMW-K144
52User Manual 1178.8013.02 ─ 06
2. Select "General > Users/BWPs" > "DL BWPs".
The dialog comprises the settings for the DL/UL bandwidth parts (BWP) configura-
tion. The UL BWPs dialog is displayed for DL and UL direction, whereas the DL
BWP - only for DL direction.
For each user and carrier combination, you can configure one or more BWPs. You can
configure BWPs in the bandwidth part configuration table. This table consists of sev-
eral rows, each of which corresponds to a BWP. The size of the table therefore
depends on the number of BWPs you have selected.
Each BWP is indicated by a BWP indicator. The bandwidth of the BWP depends on the
number of RBs it occupies. Its allocation in the frequency, on the selected RB offset.
The resulting frequency offset between the BWP center and the center of the carrier is
indicated, too.
Users/BWPs Settings
To Next Page
Loading...