Rohde & Schwarz SMW-K144 - Page 53

5G New Radio Configuration and Settings
R&S
®
SMW-K144
53User Manual 1178.8013.02 ─ 06
Figure 5-1: Bandwidth parts
BWP# = Bandwidth part and indicator
SCS = Subcarrier spacing
Center carrier = Center frequency of the carrier (cell)
#RB = Number of resource blocks or channel bandwidth per BWP
RB offset = Frequency offset between the first usable resource block (URB) and the start of the BWP
1st URB = First usable resource block (URB), that is the first RB within the transmission bandwidth
TxBW, see Figure 3-2
Δf = Frequency offset between the center frequency of the BWP and the center frequency of the
carrier
Carrier = Channel bandwidth of the carrier
OFDM symbol = Represent the time domain
Settings:
User...............................................................................................................................53
Cell................................................................................................................................54
Number of DL/UL BWPs............................................................................................... 54
BWPs table................................................................................................................... 54
└ BWP Indicator.................................................................................................54
└ SC Spacing/CP...............................................................................................54
└ No. RBs...........................................................................................................54
└ RB Offset in TxBW..........................................................................................55
└ RB Offset to Point A........................................................................................55
└ Δf to Carrier (Centers).....................................................................................55
User
Selects the user to be configured.
Users/BWPs Settings