5G New Radio Configuration and Settings
R&S
®
SMW-K144
25User Manual 1178.8013.02 ─ 06
Remote command:
[:SOURce<hw>]:BB:NR5G:LINK on page 164
Test Models
Accesses a dialog for selecting of:
●
One of the 5G NR Test Models (NR TM) defined in TS 38.141-1/TS 38.141-2
and TS 38.104.
The NR FR1/FR2 test modesl are predefined configurations of 5G NR settings. The
3GPP specifications define three main groups of test models, the NR-RF-TM1, NR-
FR-TM2 and NR-FR-TM3. Each TM is defined for a subset of different channel
bandwidths and subcarrier spacings.
The test model use common physical channel parameters for PDSCH and
PUCCH, as well as specific physical channels paramezters per test model.
The follwoing naming convention is used:
NR-<FR>-TM<TestModel>__<Dupplexing>_<ChBW>MHz_<SCS>kHz, where:
– <FR> designates 5G NR test modules for the frequency range FR1 ≤ 6 GHz
and FR2 > 6 GHz
– <TestModel> is the TM designation according to TS 38.141-1/TS 38.141-2
– <Dupplexing> indicates if FDD or TDD duplexig is used
– <ChBW> is one of the defined basestations channel bandwidths: 5 MHz, 10
MHz, 15 MHz, 20 MHz, 25 MHz, 30 MHz, 40 MHz, 50 MHz, 60 MHz, 70 MHz,
70 MHz, 80, MHz, 90 MHz 100 MHz
– <SCS> indicates the subcarrie spacing of 15 kHz, 30 kHz or 60 kHz.
●
Predefined example test signal.
General Settings
To Next Page
Loading...