Rohde & Schwarz SMW-K144 - Page 93

5G New Radio Configuration and Settings
R&S
®
SMW-K144
93User Manual 1178.8013.02 ─ 06
Settings:
I_MCS........................................................................................................................... 93
Target Code Rate..........................................................................................................93
Phys. Bits...................................................................................................................... 93
Transport Block Size..................................................................................................... 94
Redundancy Version Index........................................................................................... 94
I_MCS
Sets the modulation and coding scheme index.
The available values depend on the selected Modulation.
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PDSCh|PUSCh:CCODing:IMCS
on page 226
Target Code Rate
Indicates the target code rate, set automatically depending on the selected modulation
and coding scheme ("I_MSC").
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>[:CW<s2us0>]:PDSCh|PUSCh:CCODing:TCRate?
on page 227
Phys. Bits
Indicates the size of the selected allocation in bits.
PDSCH/PUSCH Settings