Rohde & Schwarz SMW-K144 - Page 235

Remote-Control Commands
R&S
®
SMW-K144
235User Manual 1178.8013.02 ─ 06
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:IL:SHIDx <CSIntlShiftIdx>
Sets the shift index n
shift
.
Parameters:
<CSIntlShiftIdx> integer
Range: 0 to 274
*RST: 0
Example: See Example "Configuring the CORESET settings"
on page 157.
Manual operation: See "Shift Index" on page 103
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:IL:SIZE <CSIntlSize>
Sets the interleaver size R.
Parameters:
<CSIntlSize> IS2 | IS3 | IS6
*RST: IS2
Example: See Example "Configuring the CORESET settings"
on page 157.
Manual operation: See "Size" on page 103
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DMRS:SPACe<s2us0>:AGGLevel?
Queries the possible aggregation levels.
Return values:
<AggrLevel> AL1 | AL2 | AL4 | AL8 | AL16
*RST: AL1
Example: See Example "Configuring the CORESET settings"
on page 157.
Usage: Query only
Manual operation: See "Aggregation Level" on page 104
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DMRS:SPACe<s2us0>:MAXCandidate
<MaxCandidate>
Sets the maximum number of candidates allowed for the selected aggregation level.
CORESET Commands