Rohde & Schwarz SMW-K144 - Page 108

5G New Radio Configuration and Settings
R&S
®
SMW-K144
108User Manual 1178.8013.02 ─ 06
Table 5-6: Search space sets
Search space Designation CRC scrambled with
CSS
(Common search
space)
Type0-PDCCH
Type0A-PDCCH
SI-RNTI
Type1-PDCCH RA-RNTI or TC-RNTI
Type2-PDCCH P-RNTI
Type3-PDCCH INT-RNTI, SFI-RNTI, TPC-PUSCH/PUCCH/SRS-
RNTI,
C-RNTI, CS-RNTI
UE-specific search
space
USS C-RNTI, CS-RNTI
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:SSP on page 238
Aggregation Level ← DCI Table
Sets the aggregation level for the selected DCI.
A physical downlink control channel PDCCH consists of one or more control-channel
elements (CCEs), where their number is defined by the "Aggregation level".
This and several other parameters influence the way the search space is defined. For
details, see "Search Space" on page 103.
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:AGGLevel on page 238
Candidate ← DCI Table
Selects one of the candidates configured for the selected Aggregation Level, where the
number of candidates per aggregation level is set by the parameter "CORESET > Gen-
eral" > Max Candidates.
This and several other parameters influence the way the search space is defined. For
details, see "Search Space" on page 103.
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:CANDidate on page 239
CCE Index ← DCI Table
Sets or displays the CCE start index and thus the position of the first CCE of the
PDCCH.
This and several other parameters influence the way the search space is defined. For
details, see "Search Space" on page 103.
Remote command:
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CS:DCI<s2us0>:INDex on page 239
CORESET Settings