Roland M-5000 - Copying;Pasting Input Channel;Output Bus Settings on the HOME Screen; Copying Input Channel;Output Bus Settings on the HOME Screen; Pasting Input Channel;Output Bus Settings on the HOME Screen

HOME Screen
100
Copying/Pasting Input Channel/Output
Bus Settings on the HOME Screen
Copying Input Channel/Output Bus Settings on
the HOME Screen
1. Go to the display section and press the [MENU] button.
The MENU window appears.
2. Tap <COPY>.
3. Press the [SEL] button for the input channel or output bus
you want to copy, or go to the HOME screen and tap the
parameter you want to copy.
4. Tap <COPY>.
The selected setting is saved to the clipboard.
Pasting Input Channel/Output Bus Settings on
the HOME Screen
1. Go to the display section and press the [MENU] button.
The MENU window appears.
2. Tap <PASTE>.
3. Press the [SEL] button for the input channel or output bus
where you want to paste, or go to the HOME screen and
tap the parameter where you want to paste.