Roland M-5000 - Appendix and Specifications; Main Technical Specifications

Overview of Operations
62
Restoring All Data in the M-5000
The data in the M-5000 is saved as a project le.
You restore data to the M-5000 by loading a project le from a USB
ash drive.
Loading a Project File from a USB Flash Drive
1. Press the [MENU] button.
2. On the MENU window, tap <SETUP>, then tap
<PROJECT>.
The PROJECT window appears.
ICON
3. Move to the folder where you want to load the le.
Moves one level below the current folder.
Moves up one level.
4. Tap <ICON> for the project le you want to load.
5. Tap <LOAD>.
The LOAD PROJECT window appears.
6. Select the section you want to load, then tap <LOAD>.
The data in the selected section is loaded.