Roland M-5000 - Recalling a Scene; Recording;Playback To;From a USB Flash Drive; WAV File Formats; Recording to a USB Flash Drive

Overview of Operations
60
Recalling a Scene
1. Go to the scene section on the top panel and press the
[SELECT H] or [SELECT I] button to select the number of
the scene you want to recall.
2. Press the [RECALL] button.
A popup prompting you to conrm the operation is displayed.
3. Press the [RECALL] button.
The scene is recalled.
Recording/Playback to/from a USB Flash
Drive
You can record 2-track WAV les to a USB ash drive. You can also
play back 2-track WAV les from a USB ash drive.
WAV File Formats
The formats of recordable WAV les are as follows.
The sampling frequency of recorded WAV les is the same as the
M-5000’s sampling frequency.
Sampling frequency: 96kHz, 48kHz, 44.1kHz
Bit depth: 16bits
Number of channels: 2 channels
The formats of playable WAV les are as follows.
Playback is possible even if the sampling frequency of the WAV le
diers from the M-5000’s sampling frequency.
Sampling frequency: 96kHz, 48kHz, 44.1kHz
Bit depth: 24bits, 16bits
Number of channels: 2 channels, 1channel
Recording to a USB Flash Drive
1. Go to the recorder section on the top panel and press the
[DISP] button.
The RECORDER window appears.
2. Tap <SOURCE>.
The SOURCE popover appears.