M-48 Control
216
Recalling the Mixer Settings of All M-48 Units
from Memory (M-48 MANAGER Window)
You use the M-48 MANAGER window to recall from memory
the mixer settings of all M-48 units (except M-48 units for which
<MEMORY SAFE> is turned on).
1. Display the M-48 MANAGER window.
2. Tap <RECALL ALL>.
A popover for selecting the memory number appears.
3. Select the memory number you want to recall.
A popup prompting you to conrm the operation is displayed.
4. Tap <OK>.
The mixer settings of all M-48 units (except M-48 units for which
<MEMORY SAFE> is turned on) are recalled from the memory
number you selected in step 3.
Saving Settings of an Entire M-48
You can save the settings of an entire M-48 on the M-5000 or a USB
ash drive.
When saving the settings on the M-5000, you use M-48 libraries.
When using a USB ash drive, the settings are saved as an M-48
project le, which you can manage using a computer or the like.
M-48 library
M-48 project le
To Next Page
Loading...
Need help?
General
