Roland M-5000 - Stereo Flanger); BOSS Compact Pedal Effects; Chorus Ensemble)

About Eect Types
153
SBF-325 (Stereo Flanger)
This is a stereo-in, stereo-out anger that models the Roland SBF-
325 Stereo Flanger.
EFFECT ON Turns the eect sound on/o
DIRECT ON Turns the unprocessed sound on/o
EFFECT MODE
FLANGER I: Monaural mode anger
FLANGER II: Stereo mode anger
FLANGER III: Cross-mix mode anger
OFF: Modulation o
CHORUS: Chorus
CH-A PHASE
Species whether the channel A anger sound
will be phase-reversed
NORM/INV
CH-B MOD
Species whether the channel B anger eect
will be inverted
NORM/INV
CH-B PHASE
Species whether the channel B anger sound
will be phase-reversed
NORM/INV
FEEDBACK
Amount of anger sound returned to the input
(valid only if EFFECT MODE is set to FLANGER)
CENTER FREQ
Center frequency at which the anger eect is
applied
MOD RATE Modulation rate
MOD DEPTH Modulation depth
LEVEL Output level
BOSS Compact Pedal Eects
CE-1 (Chorus Ensemble)
This is a chorus modeled on the Boss CE-1 Chorus Ensemble.
The original has mono in and mono out (or wet/dry out)
specications, but the modeling adds a mode selection switch
that also enables use as an eect with stereo in or stereo out
specications. The modeling also provides a level knob for
adjusting the output level.
The CE-1 was launched in 1976 as the rst Boss-branded product.
EFFECT ON Turns the eect sound on/o
INPUT MODE
MONO: Signals input to IN L and IN R for use as
mono in or mono out eects are mixed. The same
signal is output from OUT L and OUT R.
MONO-ST: Used as eects for mono in or wet/
dry out
(OUT L: wet out, OUT R: dry out)
STEREO: Used as eects for stereo in or stereo out
CHORUS/VIBRATO CHORUS/VIBRATO
LEVEL Adjustment of output level
CHO INTENS Adjustment of chorus eect
VIB DEPTH Depth of vibrato eect
VIB RATE Cycle of vibrato eect