Roland M-5000 - Copying;Pasting Input Channel;Output Bus Settings at the CH EDIT Window; Copying Input Channel;Output Bus Settings at the CH EDIT Window; Pasting Input Channel;Output Bus Settings at the CH EDIT Window

CH EDIT Window
116
Copying/Pasting Input Channel/Output
Bus Settings at the CH EDIT Window
Copying Input Channel/Output Bus Settings at
the CH EDIT Window
1. Display the CH EDIT window where you want to copy.
2. Go to the display section and press the [MENU] button.
The MENU window appears.
3. 3. Tap <COPY (INPUT, DYN, EQ, MISC, SENDS, PAN, DCA/
MUTE)>.
The selected setting is saved to the clipboard.
Pasting Input Channel/Output Bus Settings at
the CH EDIT Window
1. Display the CH EDIT window where you want to paste.
2. Go to the display section and press the [MENU] button.
The MENU window appears.
3. Tap PASTE (INPUT, DYN, EQ, MISC, SENDS, PAN, DCA/
MUTE)>.
The setting is pasted.
Memo
To undo (cancel) the last paste operation, go to the MENU
window and tap <UNDO PASTE>.