Roland M-5000 - Working with Projects; Loading a Project File; Saving a Project File

Projects
232
Working with Projects
Saving a Project File
You save project les on a USB ash drive.
When you save a le, the data in all categories is saved.
1. Display the PROJECT window.
2. Move to the folder where you want to save the le.
Moves one level below the current folder.
Creates a new folder at the current level.
Moves up one level.
3. Tap <SAVE>.
A window for specifying the le name is displayed.
Memo
You can tap the existing le to overwrite.
4. Specify the le name, then tap <SAVE>.
The data in all categories is saved as a project le (extension: m5pj).
Loading a Project File
You load project les from a USB ash drive.
When you load a le, you can select individual sections of data to
load.
1. Display the PROJECT window.
2. Move to the folder where you want to load the le.
Moves one level below the current folder.
Moves up one level.
3. Tap <ICON> for the project le you want to load.
4. Tap <LOAD>.
The LOAD PROJECT window appears.
5. Select the section you want to load, then tap <LOAD>.
The data in the selected section is loaded.