Configuration Guide Configuring WIDS
device permit { mac-address H.H.H | mac-address max num | ssid ssid | max-ssid num | vendor bssid
H.H.H | vendor bssid max num }
mac-address H.H.H: Indicates the permissible MAC list entry, null by default.
mac-address max num: Indicates the permissible MAC list length, ranging from 1 to 2,048, 1,024 by
default.
ssid ssid: Indicates the permissible SSID list entry, null by default.
max-ssid num: Indicates the permissible SSID list length, ranging from 1 to 1,024, 512 by default.
vendor bssid H.H.H: Indicates the permissible vendor list entry, null by default.
vendor bssid max num: Indicates the permissible vendor list length, ranging from 1 to 1,024, 512 by
default.
See the Parameter Description.
The containment function has no effect when the AP operates in Normal mode.
Configuring the Maximum Number of Contained Devices Once
Optional. Run the countermeasures ap-max ap-num command to configure the quantity of one-time Rogue device
containment in WIDS configuration mode.
countermeasures ap-max ap-num
ap-num: Indicates the maximum number of countered devices each time, ranging from 1 to 256.
The default maximum number of countered devices is 30.
The containment function has no effect when the AP operates in Normal mode.
Configuring the Aging Duration of the Detected Devices
Optional. Run the device aging duration time command to configure the aging duration of the detected devices in
WIDS configuration mode.
device aging duration time
time: Indicates the aging duration, ranging from 500 to 5,000 seconds.
The default aging duration is 1,200 seconds.
The containment function has no effect when the AP operates in Normal mode.
Configuring the Device Friendly Flag
Optional. Run the device friendly-flags value command to configure the device friendly flag in WIDS configuration
mode.
To Next Page
Loading...
