Configuration Guide Configuring WIDS
config: Indicates Config containment mode, countering devices which meet entries in the SSID blacklist and
static attack list.
rogue: Indicates Rogue containment mode, countering devices whose RSSI is larger than the threshold.
ssid: Indicates SSID containment mode, countering devices with the same SSID but not on the same AC.
all: Indicates all the above containment modes.
No containment mode is specified by default.
The containment function has no effect when the AP operates in Normal mode.
Configuring the Static Attack List
Optional. Run the device attack mac-address H.H.H command to configure the static attack statistic list information in
WIDS configuration mode.
device attack { mac-address H.H.H |max num }
mac-address H.H.H: Indicates the MAC address of a static attack list entry.
max num: Indicates the length of the static attack list, ranging from 1 to 1,024.
The static attack list is empty, and the length of the static attack list is 512 by default.
The containment function has no effect when the AP operates in Normal mode.
Configuring the SSID-based Blacklist
Optional. Run the device black-ssid ssid command to configure the SSID blacklist information in WIDS configuration
mode.
device { black-ssid ssid |max-black-ssid num }
black-ssid ssid: Indicates the SSID blacklist entry.
max-black-ssid num: Indicates the SSID blacklist length, ranging from 1 to 1,024.
The SSID blacklist is empty, and the SSID blacklist length is 512 by default.
The containment function has no effect when the AP operates in Normal mode.
Configuring the Lists of Permissible MACs, SSIDs and Vendors
Optional.
Run the device permit mac-address H.H.H command to configure the permissible MAC list entry in WIDS
configuration mode.
Run the device permit ssid H.H.H command to configure the permissible SSID list entry in WIDS configuration mode.
Run the device permit vendor H.H.H command to configure the permissible vendor list entry in WIDS configuration
mode.
To Next Page
Loading...
