Ruijie RG-WLAN Series

Configuration Guide Configuring RMON
dropEvents = 0
octets = 432
pkts = 6
broadcastPkts = 0
multiPkts = 0
crcAlignErrors = 0
underSizePkts = 0
overSizePkts = 0
fragments = 0
jabbers = 0
collisions = 0
utilization = 0
index = 1
sampleIndex = 790
intervalStart = 6d:18h:41m:38s
dropEvents = 0
octets = 86734
pkts = 934
broadcastPkts = 32
multiPkts = 23
crcAlignErrors = 0
underSizePkts = 0
overSizePkts = 0
fragments = 0
jabbers = 0
collisions = 0
utilization = 0
Common Errors
History control table entries are re-configured or configured history control table entries are modified.
4.4.3 Configuring RMON Alarm
Configuration Effect
Periodically monitor whether value changes of alarm variables are within the specified valid range.
Notes
If a trap message needs to be transmitted to a managing device when an alarm event is triggered, the SNMP agent must be
correctly configured. For the configuration of the SNMP agent, see the Configuring SNMP.