Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring RLOG
Enable RLOG export
(Mandatory). It is used to configure the server address and port.
rlog server ip-address [ vrf vrf-name ] [ port
port-num ]
Specifies the RLOG server and the
VRF/MGMT port to enable RLOG export.
The default port number is 20000.
rlog type n server server-ip priority prio
Specifies the RLOG type and priority for a
specific server
Configure RLOG parameters
(Optional). It is used to configure the RLOG export rate.
rlog export-rate val
Sets the RLOG export rate (export counts
per second).
rlog set log-com
Enables RLOG combination export.
rlog dev-ip ip
Specifies the RLOG device.
rlog filter acl_id
Enables the RLOG filtering. (not supported
currently)
8.4.1 Enabling RLOG
Networking
Requirements
 Configure the RLOG server.
 Configure RLOG-specific export.
Notes
 N/A
Configuration Steps
 Configuring RLOG servers
 Mandatory
 At least one RLOG server should be configured.
 Configure RLOG-specific export
 Mandatory
 At least one RLOG type should be configured.
Verification
 If RLOG export is functional, check whether the RLOG server receives every log.
Related Commands
 Configuring the RLOG server
Command
rlog server ip-address [ vrf vrf-name ] [ port port-num ]

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English