Ruijie RG-WLAN Series

Configuration Guide Configuring CWMP
Action
Suggestions and Related Commands
disable upload
Disables the function of uploading
configuration and log files to the ACS.
timer cpe- timeout
Configures the ACS response timeout on
CPEs.
9.3.5 Establishing a Basic CWMP Connection
Configuration Effect
 A session connection is established between the ACS and the CPE.
Precautions
 N/A
Configuration Method
 Enabling CWMP and Entering CWMP Configuration Mode
 (Mandatory) The CWMP function is enabled by default.
Command
cwmp
Parameter
Description
N/A
Defaults
CWMP is enabled by default.
Command
Mode
Global configuration guide
Usage Guide
N/A
 Configuring the ACS Username for CWMP Connection
 This configuration is mandatory on the ACS.
 Only one username can be configured for the ACS. If multiple are configured, the latest configuration is applied.
Command
acs username username
Parameter
Description
username username: The ACS username for CWMP connection
Defaults
The ACS username is not configured by default.
Command
Mode
CWMP configuration mode
Usage Guide
N/A
 Configuring the ACS Password for CWMP Connection
 This configuration is mandatory on the ACS.
 The password of the ACS can be in plaintext or encrypted form. Only one password can be configured for the ACS. If
multiple are configured, the latest configuration is applied.