Configuration Guide Configuring CWMP
acs password {password | encryption-type encrypted-password}
password: ACS password
encryption-type: 0 (no encryption) or 7 (simple encryption)
encrypted-password: Password text
encryption-type: 0
encrypted-password: N/A
 Configuring the CPE Username for CWMP Connection
 This configuration is mandatory on the CPE.
 Only one username can be configured for the CPE. If multiple are configured, the latest configuration is applied.
No CPE username is configured by default.
 Configuring the CPE Password for CWMP Connection
 This configuration is mandatory on the CPE.
 The password of the CPE can be in plaintext or encrypted form. Only one password can be configured for the CPE. If
multiple are configured, the latest configuration is applied.
cpe password {password | encryption-type encrypted-password}
password: CPE password
encryption-type: 0 (no encryption) or 7 (simple encryption)
encrypted-password: Password text
encryption-type: 0
encrypted-password: N/A
Use this command to configure the CPE user password to be authenticated for the ACS to connect to the
CPE. In general, the encryption type does not need to be specified. The encryption type needs to be
specified only when copying and pasting the encrypted password of this command. A valid password should
meet the following format requirements:
 Contain 1 to 26 characters including letters and figures.
 The leading spaces will be ignored, while the trailing and middle are valid.
 If 7 (simple encryption) is specified, the valid characters only include 0 to 9 and a (A) to f (F).
To Next Page
Loading...
Need help?
General
