Configuration Guide Configuring PKG_MGMT
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!
Transmission finished, file length 9868 bytes.
Upgrade processing is 10%
Upgrade processing is 60%
Upgrade info [OK]
patch_bridge version[1.0.0.1952]
Upgrade processing is 90%
Upgrade info [OK]
patch_install version[1.0.0.192e35a]
Ruijie#patch running
The patch on the system now is in running status
 Check the hot patches installed on the current device.
:patch package patch_install installed in the system, version:pa1
Package : patch_bridge
Status：running
Version: pa1 Build time: Mon May 13 09:03:07 2013
Size: 277 Install time: Tue May 21 03:07:17 2013
Description: a patch for bridge
Required packages: None
 Example of Subsystem Rollback on the Box-Type Device
You can perform the rollback operation only if the last upgrade is subsystem upgrade and the upgrade is successful.
The rollback command cannot be executed in succession.
Before the upgrade, you must copy the firmware to the device. The upgrade module provides the following
solutions.
 Run some file system commands like copy tftp and copy xmodem to copy the firmware on the server
to the device file system, and then run the upgrade url command to upgrade the firmware in the local
file system.
 Run the upgrade download tftp://path command directly to upgrade the firmware file stored on the
tftp server.
To Next Page
Loading...
Need help?
General
