Ruijie RG-WLAN Series

Configuration Guide Configuring PKG_MGMT
Reload system to take effect!
Reload system?(Y/N)y
Restarting system.
Verification
 Check the version of the feature component on the current device. If the version information changes,
the upgrade is successful.
Ruijie# show component
Package :sysmonit
Version:1.0.1.23cd34aa Build time: Wed Dec 7 00:58:56 2011
Size:12877 Install time :Wed Mar 5 14:23:12 2012
Description:this is a system monit package
Required packages: None
-------------------------------------------------------------------
package:bridge
Version: 2.3.1.1252ea Build time: Wed Dec 7 00:54:56 2011
Size:26945 Install time : Wed Mar 19:23:15 2012
Description:this is a bridge package
Required packages: None
 Example of Installing a Patch Package on the Box-Type Device
Network
Environment
Before the upgrade, you must copy the firmware to the device. The upgrade module provides the following
solutions.
 Run some file system commands like copy tftp and copy xmodem to copy the firmware on the server
to the device file system, and then run the upgrade url command to upgrade the firmware in the local
file system.
 Run the upgrade download tftp://path command directly to upgrade the firmware file stored on the
tftp server.
 Copy the firmware to a USB flash drive, connect the USB flash drive to the device, and then run the
upgrade url command to upgrade the firmware in the USB flash drive.
Configuration
Steps
 Run the upgrade command.
 Activate the hot patch.
Ruijie#upgrade download tftp://192.168.201.98/eg1000m_RGOS11.0(1C2)_20131008_patch.bin
Accessing tftp://192.168.201.98/eg1000m_RGOS11.0(1C2)_20131008_patch.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!