Configuration Guide Configuring PKG_MGMT
Upgrade processing is 100%
Reload system to take effect!
Reload system?(Y/N)y
Restarting system.
 Check the system version on the current device. If the version information changes, the upgrade is
successful.
Ruijie#show upgrade history
Last Upgrade Information:
Time: 2014-08-31 12:15:03
Method: LOCAL
Package Name: N18000_RGOS11.0(1)B1_CM_01200616_install.bin
Package Type: Distribution
 Example of Upgrading a Feature Package on the Box-Type Device
Before the upgrade, you must copy the firmware to the device. The upgrade module provides the following
solutions.
 Run some file system commands like copy tftp and copy xmodem to copy the firmware on the server
to the device file system, and then run the upgrade url command to upgrade the firmware in the local
file system.
 Run the upgrade download tftp://path command directly to upgrade the firmware file stored on the
tftp server.
 Copy the firmware to a USB flash drive, connect the USB flash drive to the device, and then run the
upgrade url command to upgrade the firmware in the USB flash drive.
 Run the upgrade command.
 Check whether the device needs to be restarted based on the prompt displayed after the upgrade.
Ruijie#upgrade sata0://bridge_eg1000m_2.3.1.1252ea-1.mips.rpm
Ruijie#upgrade sata0://bridge_eg1000m_2.3.1.1252ea-1.mips.rpm
Upgrade processing is 10%
Upgrade processing is 60%
Upgrade processing is 90%
Upgrade info [OK]
bridge version[2.0.1.37cd5cda ->2.3.1.1252ea] [OK]
Upgrade processing is 100%
To Next Page
Loading...
Need help?
General
