Configuration Guide Configuring PKG_MGMT
Ruijie#patch deactive
Deactive the patch package success
Ruijie# patch delete
Clear the patch patch_bridge success
Clear the patch success
Ruijie#show patch
No patch package installed in the system
Common Errors
Run the patch deactive command when the patch is not activated. It is recommended to check the patch status. You
can run the patch deactive command only when the patch is in the status:running state.
5. Monitoring
Clearing
Deletes a hot patch package
already installed.
Displaying
Displays all components already installed on the
current device and their information.
show component [component _name ]
Displays the information about the hot patch
packages already installed on the device.
show patch [patch _name ]
Displays the upgrade history.