Ruijie RG-WLAN Series

Configuration Guide Configuring Time Range
 Configuring Time Range
 Mandatory configuration.
 Perform the configuration on a device to which a time range applies.
 Configuring Absolute Time Range
 Optional configuration.
 Configuring Periodic Time
 Optional configuration.
Verification
 Use the show time-range [time-range-name] command to check time range configuration information.
Related Commands
 Configuring Time Range
Command
time-range time-range-name
Parameter
Description
time-range-name: name of the time range to be created.
Command
Mode
Global configuration mode
Usage Guide
Some applications (such as ACL) may run based on time. For example, an ACL can be effective within
certain time ranges of a week. To this end, first you must configure a time range, then you can configure
relevant time control in time range configuration mode.
 Configuring Absolute Time Range
Command
absolute { [start time date] | [end time date] }
Parameter
Description
start time date: start time of the range.
end time date: end time of the range.
Command
Mode
Time range configuration mode
Usage Guide
Use the absolute command to configure a time absolute time range between a start time and an end time to
allow a certain function to take effect within the absolute time range.
 Configuring Periodic Time
Command
periodic day-of-the-week time to [day-of-the-week] time
Parameter
Description
day-of-the-week: the week day when the periodic time starts or ends
time: the exact time when the periodic time starts or ends
Command
Mode
Time range configuration mode
Usage Guide
Use the periodic command to configure a periodic time interval to allow a certain function to take effect