Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring WAPI
same time. After the WAPI three-certificate authentication mode is configured, the STA accesses the WLAN by using
the three-certificate authentication mode.
Command
security wapi 3-cert { enable | disable }
Parameter
Description
enable: Enables the WAPI three-certificate authentication.
disable: Disables the WAPI three-certificate authentication.
Defaults
Disabled
Command
Mode
WLAN security configuration mode
Usage Guide
Before configuring the three-certificate authentication mode, enable the WAPI security mode.
In the security configuration mode of a WLAN, the two-certificate and three-certificate authentication modes
cannot be enabled at the same time.
 Configuring the WAPI Certificate of the AE
 Mandatory.
 It is configured in the WLAN security configuration mode on the AP.
Command
security wapi ae cert ae_certfile
Parameter
Description
ae_certfile: Specifies the WAPI certificate file name of the AE
Defaults
N/A
Command
Mode
WLAN security configuration mode
Usage Guide
Before configuring the AE certificate, enable the WAPI security mode.
Before configuration, ensure that the certificate file is imported into the AE and ASUE.
 Configuring the IP Address of the Authentication Server
 Mandatory.
 It is configured in the WLAN security configuration mode on the AP.
Command
security wapi asu address ip_address
Parameter
Description
ip_address: Specifies the IP address of the authentication server.
Defaults
N/A
Command
Mode
WLAN security configuration mode
Usage Guide
Before configuring the IP address of the authentication server, enable the WAPI security mode.
 Configuring the WAPI Certificate for the Authentication Server
 Optional. The ASU certificate must be configured for the three-certificate authentication mode.
 It is configured in the WLAN security configuration mode on the AP.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English