Ruijie RG-WLAN Series - Page 18

Configuration Guide Configuring Ethernet Management
 Run the wired-rate command to configure the maximum bandwidth of various LAN ports.
Command
wired-rate value
Parameter Description
N/A
Defaults
By default, the maximum bandwidths of various LAN ports are not limited.
Command Mode
Interface configuration mode
Usage Guide
N/A
3.4.1.4 Verification
 Run the show running-config command to display the configuration about the bandwidth restriction of various LAN
ports.
3.4.1.5 Configuration Example
N/A
3.5 Monitoring
 N/A