Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring VLAN Group
 Configuring a VLAN List for a VLAN Group
 Mandatory. Ensure that VLANs have been created.
Command
vlan-list vlan-list
Parameter
Description
vlan-list: indicates a VLAN list, containing a maximum of 128 VLANs.
Defaults
No VLAN list is configured.
Command
Mode
VLAN group configuration mode
Usage Guide
N/A
 Configuring the VLAN Assignment Mode for a VLAN Group
 Mandatory.
 Use this command to implement the VLAN assignment policy of a VLAN group.
Command
vlan-assign-mode {dot1x }
Parameter
Description
dot1x: After 802.1X authentication succeeds, the authentication server assigns a VLANs to STAs.
Defaults
No VLAN assignment mode is configured.
Command
Mode
VLAN group configuration mode
Usage Guide
In global configuration mode, the configurations apply to all VLAN groups.
In VLAN group configuration mode, the configurations apply to the current VLAN group only.
Configurations in VLAN group configuration mode have priority over configurations in global configuration
mode.
There are two VLAN assignment modes: 802.1X-based.
 Configuring the Default VLAN for a VLAN Group
 Mandatory in 802.1X-based assignment mode.
 The default VLAN takes effect when the current WLAN is in 802.1X-based assignment mode, that is, when the
authentication server assigns the default VLAN before 802.1X authentication succeeds.
Command
default-vlan vlan-id
Parameter
Description
vlan-id: indicates the ID of a VLAN in the VLAN list of the VLAN group.
Defaults
No default VLAN is specified.
Command
Mode
VLAN group configuration mode
Usage Guide
Before configuring the default VLAN, you must add this VLAN to the destination VLAN group.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English