no lldp tlv-enable {basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id | vlan-name } | dot3-tlv { all |
link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
location { civic-location | elin } identifier id | network-policy profile [ profile-num ] |
power-over-ethernet } }
basic-tlv: Indicates the basic management TLV.
port-description: Indicates the Port Description TLV.
system-capability: Indicates the System Capabilities TLV.
system-description: Indicates the System Description TLV.
system-name: Indicates the System Name TLV.
dot1-tlv: Indicates the IEEE 802.1 organizationally specific TLVs.
port-vlan-id: Indicates the Port VLAN ID TLV.
protocol-vlan-id: Indicates the Port And Protocol VLAN ID TLV.
vlan-name: Indicates the VLAN Name TLV.
dot3-tlv: Indicates the IEEE 802.3 organizationally specific TLVs.
link-aggregation: Indicates the Link Aggregation TLV.
mac-physic: Indicates the MAC/PHY Configuration/Status TLV.
max-frame-size: Indicates the Maximum Frame Size TLV.
power: Indicates the Power Via MDI TLV.
med-tlv: Indicates the LLDP MED TLV.
capability: Indicates the LLDP-MED Capabilities TLV.
Inventory: Indicates the inventory management TLV, which contains the hardware version, firmware
version, software version, SN, manufacturer name, module name, and asset identifier.
location: Indicates the Location Identification TLV.
civic-location: Indicates the civic address information and postal information.
elin: Indicates the emergency telephone number.
id: Indicates the policy ID, ranging from 1 to 1,024.
network-policy: Indicates the Network Policy TLV.
profile-num: Indicates the Network Policy ID, ranging from 1 to 1,024.
power-over-ethernet: Indicates the Extended Power-via-MDI TLV.
To Next Page
Loading...
