Ruijie RG-WLAN Series

Configuration Guide Configuring LLDP
Usage Guide
N/A
Configuration Example
 Configuring TLVs to Be Advertised
Configuration
Steps
Cancel the advertisement of the IEEE 802.1 organizationally specific Port And Protocol VLAN ID TLV.
Ruijie(config)#interface gigabitethernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#no lldp tlv-enable dot1-tlv protocol-vlan-id
Verification
Display LLDP TLV configuration in interface configuration mode.
Ruijie(config-if-GigabitEthernet 0/1)#show lldp tlv-config interface gigabitethernet 0/1
LLDP tlv-config of port [GigabitEthernet 0/1]
NAME STATUS DEFAULT
------------------------------ ------ -------
Basic optional TLV:
Port Description TLV YES YES
System Name TLV YES YES
System Description TLV YES YES
System Capabilities TLV YES YES
Management Address TLV YES YES
IEEE 802.1 extend TLV:
Port VLAN ID TLV YES YES
Port And Protocol VLAN ID TLV NO YES
VLAN Name TLV YES YES
IEEE 802.3 extend TLV:
MAC-Physic TLV YES YES
Power via MDI TLV YES YES
Link Aggregation TLV YES YES
Maximum Frame Size TLV YES YES