Ruijie RG-WLAN Series

Configuration Guide Configuring LLDP
Configuration Steps
 Optional.
 Configure the number of LLDP packets that are fast transmitted in global configuration mode.
Verification
Displaying the global LLDP status information
 Check whether the configuration takes effect.
Related Commands
 Configuring the LLDP Fast Transmission Count
Command
lldp fast-count value
Parameter
Description
value: Indicates the number of LLDP packets that are fast transmitted. The value ranges from 1 to 10. The
default value is 3.
Command
Mode
Global configuration mode
Usage Guide
N/A
 Restoring the Default LLDP Fast Transmission Count
Command
no lldp fast-count
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration Example
 Configuring the LLDP Fast Transmission Count
Configuration
Steps
Set the LLDP fast transmission count to 5 in global configuration mode.
Ruijie(config)#lldp fast-count 5
Verification
Display the global LLDP status information.
Ruijie(config)#show lldp status
Global status of LLDP : Enable
Neighbor information last changed time :