Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring LLDP
Transmit interval : 30s
Hold multiplier : 4
Reinit delay : 2s
Transmit delay : 2s
Notification interval : 5s
Fast start counts : 5
5.4.6 Configuring the TTL Multiplier and Transmission Interval
Configuration Effect
 Configure the TTL multiplier.
 Configure the LLDP packet transmission interval.
Configuration Steps
 Optional.
 Perform the configuration in global configuration mode.
Verification
Display LLDP status information on an interface
 Check whether the configuration takes effect.
Related Commands
 Configuring the TTL Multiplier
Command
lldp hold-multiplier value
Parameter
Description
value: Indicates the TLL multiplier. The value ranges from 2 to 10. The default value is 4.
Command
Mode
Global configuration mode
Usage Guide
In an LLDP packet. the value of Time To Live TLV is calculated based on the following formula: Time to Live
TLV= TTL multiplier x Packet transmission interval + 1. Therefore, you can modify the Time to Live TLV in
LLDP packets by configuring the TTL multiplier.
 Restoring the Default TTL Multiplier
Command
no lldp hold-multiplier
Parameter
Description
N/A
Command
Global configuration mode

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English