Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring LLDP
Reinit delay : 2s
Transmit delay : 2s
Notification interval : 5s
Fast start counts : 3
5.4.7 Configuring the Transmission Delay
Configuration Effect
 Configure the delay time for LLDP packet transmission.
Configuration Steps
 Optional.
 Perform the configuration in global configuration mode.
Verification
Displaying the global LLDP status information
 Check whether the configuration takes effect.
Related Commands
 Configuring the Transmission Delay
Command
lldp timer tx-delay seconds
Parameter
Description
seconds: Indicates the transmission delay. The value ranges from 1 to 8,192.
Command
Mode
Global configuration mode
Usage Guide
When local information of a device changes, the device immediately transmits LLDP packets to its
neighbors. Configure the transmission delay to prevent frequent transmission of LLDP packets caused by
frequent changes of local information.
 Restoring the Default Transmission Delay
Command
no lldp timer tx-delay
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
When local information of a device changes, the device immediately transmits LLDP packets to its
neighbors. Configure the transmission delay to prevent frequent transmission of LLDP packets caused by

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English