Configuration Guide Configuring PPPoE Client
ppp chap hostname username
Interface configuration mode
Configuring the Password for CHAP Authentication
ppp chap password password
Interface configuration mode
Configuring the User Name and Password for PAP Authentication
ppp pap sent-username username password password
username: user name
password: password
Interface configuration mode
Defining a Dialer Triggering Rule
dialer-list number protocol protocol-name ip{ permit | deny | list access-list-number }
protocol-name: protocol name
access-list-number: ACL number
Global configuration mode
6.4.1.5 Configuration Example
The following configuration example describes configuration related to the PPPoE client only.