Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring PPPoE Client
Description
subnet-mask: manually configured subnet mask
Command Mode
Interface configuration mode
Configuration
Usage
If you select negotiate, the IP address of the dialer interface will be acquired through negotiation.
If you manually specify the IP address of the dialer interface, the peer's consent is required during
negotiation for the device to work properly.
Associating a Dialer Pool
Command Syntax
dialer pool number
Parameter
Description
number: number of the dialer pool
Command Mode
Interface configuration mode
Configuration
Usage
An Ethernet interface will be selected from the dialer pool as the dialer interface to perform dialing.
Configuring the Encapsulation Protocol
Command Syntax
encapsulation ppp
Parameter
Description
N/A
Command Mode
Interface configuration mode
Configuration
Usage
N/A
Configuring the MTU of the Logical Interface
Command Syntax
mtu 1488
Parameter
Description
N/A
Command Mode
Interface configuration mode
Configuration
Usage
Because Internet access is implemented through the PPPoE protocol, the L2 header of a packet is longer
than that of a common Ethernet packet.
Associating a Dialer Triggering Rule
Command Syntax
dialer-group dialer-group-number
Parameter
Description
dialer-group-number: number of the dialer triggering rule
Command Mode
Interface configuration mode
Configuration
Usage
If the DDR mode is specified, the device will be triggered to perform dialing only when a packet meeting
the rule is routed to the dialer interface.
If the no-DDR mode is specified, the configuration will not take effect on the device.
Configuring the User Name for CHAP Authentication

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English