Ruijie RG-WLAN Series - Page 357

Configuration Guide Configuring IP Addresses and Services
 Perform the configuration in L3 interface configuration mode.
Verification
Run the show ip interface command to check whether the configuration takes effect.
Related Commands
 Enabling ICMP Unreachable Messages
Command
ip unreachables
Parameter
Description
N/A
Command
Mode
Interface configuration mode
Usage Guide
N/A
 Enabling ICMP Redirection Messages
Command
ip redirects
Parameter
Description
N/A
Command
Mode
Interface configuration mode
Usage Guide
N/A
 Enabling ICMP Mask Response Messages
Command
ip mask-reply
Parameter
Description
N/A
Command
Mode
Interface configuration mode
Usage Guide
N/A
Configuration Example
Configuration
Steps
Enable ICMP unreachable messages, ICMP redirection messages, and mask response messages on
interface gigabitEthernet 0/1.