Ruijie RG-WLAN Series

Configuration Guide Configuring Wireless Location
 Optional.
 Use this command where there is a requirement for lower traffic bandwidth, and the deployed location system
interconnects with the location server developed by Ruijie Networks. Except as otherwise noted, you can apply the
configuration on your demand.
Command
wlocation mu report reduce enable
Parameter
Description
N/A
Defaults
Disabled
Command
Mode
Wlocation configuration mode
Usage Guide
Enable the function of simplifying MU location information to reduce bandwidth traffic, which applies only
when the deployed location server is developed by Ruijie Networks.
 Filtering Beacon Packets Sent by APs
 Optional.
 Use this command where there is a requirement for traffic bandwidth reduction. Except as otherwise noted, you can
apply the configuration on your demand.
Command
wlocation ignore beacon enable
Parameter
Description
N/A
Defaults
Disabled
Command
Mode
Wlocation configuration mode
Usage Guide
Enable the function of filtering Beacon packets sent by APs in Wi-Fi environment to reduce bandwidth
traffic.
Verification
In the deployed network, enable STAs to send wireless packets.
 Verify that APs receive wireless location information.
 Verify that the Locator receives location information.
Configuration
Example
N/A
Common Errors
N/A