Configuration Guide Configuring Web Authentication
By default, the iPortal Webauth template is not configured.
Run the web-auth template iportal command in global configuration mode to create an iPortal Webauth template.
The template is used to configure authentication-related parameters on the iPortal server.
 Customizing a Page Suite
By default, the factory file package is used.
Run the page-suite command in template configuration mode to specify the use of a page suite.
Before you specify the use of a page suite, download it to the flash memory.
 Configuring an Advertisement URL
By default, no advertisement URL is configured.
Run the popup url command in template configuration mode to configure the advertisement URL.
Advertisement URLs allow the push of specified pages to clients.
 Specifying the Advertisement Mode
The default advertisement mode is post-login mode.
Run the popup mode command in template configuration mode to specify the iPortal Webauth advertisement mode
including pre-login mode and post-login mode.
 Specifying the Webauth Binding Mode
The default Webauth binding mode is IP-MAC binding mode.
Run the bindmode command in template configuration mode to specify the Webauth binding mode.
In Web authentication on layer-3 networks, the source MAC address in a packet is changed after the packet is routed. In
such case, configure the IP-only binding mode.
 Enabling Ruijie iPortal Web Authentication
By default, Ruijie iPortal Web Authentication is disabled.
Run the web-auth enable iportal command in interface configuration mode to enable Ruijie iPortal Web Authentication on
the client-connected ports.
After Web authentication is enabled, the unauthenticated clients connecting to a port will be redirected to the Webauth URL.
 Enabling AAA
By default, AAA is disabled.
Run the aaa new-model command in global configuration mode to enable AAA.
Ruijie iPortal Web Authentication relies on AAA. Enable AAA before you implement Web authentication.
 Configuring the RADIUS-Server Host and Communication Key
To Next Page
Loading...
Need help?
General
