Configuration Guide Configuring Web Authentication
By default, the RADIUS-server host and communication key are not configured.
Run the radius-server host command in global configuration mode to configure the RADIUS-server host and
communication key.
The RADIUS-server host in Web authentication is responsible for authenticating users.
 Configuring an AAA Method List for Ruijie iPortal Web Authentication
By default, no AAA method list is configured for Ruijie iPortal Web Authentication.
Run the aaa authentication iportal command in global configuration mode to configure an AAA method list for Ruijie iPortal
Web Authentication.
The AAA authentication method list is used for interaction during the Webauth process.
 Configuring an AAA Method List for Ruijie iPortal Web Accounting
By default, no AAA method list is configured for Ruijie iPortal Web Accounting.
Run the aaa accounting network command in global configuration mode to configure an AAA method list for Ruijie iPortal
Web Accounting.
The AAA accounting method list is used for accounting interaction during the Webauth process.
 Specifying an AAA Method List
The default AAA method list is used if no list is specified.
Run the authentication command in template configuration mode to specify an AAA method list.
The AAA method list is specified to send authentication requests to AAA.
 Specifying an AAA Accounting Method List
The default AAA accounting method list is used if no list is specified.
Run the accounting command in template configuration mode to specify an AAA accounting method list.
The AAA accounting method list is specified to send accounting requests to AAA.
1.3.4 Ruijie MAC Address-Based SMS Authentication
Working Principle
After an STA is associated with an SSID enabled with MAC address-based SMS authentication, the STA obtains an IP
address through the Dynamic Host Configuration Protocol (DHCP). Then the STA is allowed to access the Internet. When
the STA uses up the traffic allowed during a time period, the access controller (AC) initiates a MAC address binding query to
the bound portal server. If the STA is bound with a MAC address, the portal server sends an authentication request. If the
STA is not bound with a MAC address, the STA needs to re-perform authentication on the portal server before accessing the
Internet.
 SMS Authentication Process for Unbound STAs
To Next Page
Loading...
Need help?
General
