Configuration Guide Configuring Web Authentication
 Configure the straight-through ARP resource as 192.168.0.0/16.
Ruijie(config)#http redirect direct-arp 192.168.0.0 255.255.0.0
 Check whether the configuration is successful.
Ruijie(config)#show web-auth direct-arp
Direct arps:
Address Mask
--------------- ---------------
192.168.0.0 255.255.0.0
Ruijie(config)#
1.4.21 Configuring an Authentication-Exempted Address Range
Configuration Effect
 Exempt users from Web authentication when accessing reachable network resources. By default, no
authentication-exempted address range is configured. All users must pass Web authentication before accessing
network resources.
 The authentication-exempted address range can be configured as an IP address range or MAC address range.
Notes
N/A
Configuration Steps
 Optional.
 Perform this configuration to allow unauthenticated clients to access network resources.
Verification
 Configure an authentication-exempted user.
 Check whether the user can access the Internet without authentication.
Related Commands
 Configuring an Authentication-Exempted Address Range
web-auth direct-host { ip-address [ ip-mask ] [ arp ] [ port interface-name ]| mac-address }
Ipv6-address: Indicates the IPv6 address of free resources.
Ipv4-address: Indicates the IPv4 address of free resources.
ip-mask: Indicates the mask of the user exempt from authentication.
To Next Page
Loading...
Need help?
General
