Configuration Guide Configuring Web Authentication
Optional.
Configure the function when the portal server needs to push the "Terminal Preemption" prompt to users.
Related Commands
Configuring Uniqueness Check of Portal Authentication Accounts in Global Configuration Mode
web-auth portal-valid unique-name
Global configuration mode
In general, configure the function when the portal server needs to push the "Terminal Preemption" prompt to
users.
Verification
After this function is enabled, if finding that a same account is used by another user and is online, the Web
authentication server directly responds to the portal server with ErrCode 2-contained ACK_AUTH.
Related Commands
Configuring Uniqueness Check of Portal Authentication Accounts
Configure uniqueness check of portal authentication accounts.
Ruijie(config)# web-auth portal-valid unique-name
Check whether the configuration is successful.
Ruijie(config)#show running-config
1.5 Monitoring
Clearing
clear web-auth user { all | ip ip-address | mac mac-address | name name-string |
session-id num }
Clears all the straight-through
network resources.
clear web-auth direct-site