Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring RSNA
When WPA authentication is used, the encryption mode and access authentication mode must also be
configured. If either the encryption mode or the access authentication mode is configured or neither of them
is configured, STAs cannot access a WLAN.
 Configuring the Encryption Mode of WPA Authentication
 Mandatory.
 It is configured in WLAN security configuration mode on the AP.
 The encryption mode of WPA authentication can be configured only after WPA authentication is enabled. The AES and
TKIP encryption modes can be enabled at the same time in WLAN security configuration mode. After an encryption
mode is configured for a WLAN, communication data between an STA and the WLAN is protected by the corresponding
encryption mode.
Command
security wpa ciphers { aes | tkip } { enable | disable }
Parameter
Description
aes: Configures the AES encryption mode.
tkip: Configures the TKIP encryption mode.
enable: Enables the encryption mode of WPA authentication.
disable: Disables the encryption mode of WPA authentication.
Defaults
No encryption mode is configured by default.
Command
Mode
WLAN security configuration mode
Usage Guide
This command is used to enable an encryption mode of WPA authentication, which can be AES or TKIP.
The AES and TKIP encryption modes can be enabled at the same time in WLAN security configuration
mode.
 Configuring the Access Authentication Mode of WPA authentication
 Mandatory.
 It is configured in WLAN security configuration mode on the AP.
 The access authentication mode can be configured only after WPA authentication is enabled. Only one access
authentication mode can be enabled for a WLAN in security configuration mode. An STA can access a WLAN that is
enabled with access authentication only after passing the access authentication.
Command
security wpa akm { psk | 802.1x } { enable | disable }
Parameter
Description
psk: Sets the access authentication mode to pre-shared key authentication.
802.1x: Sets the access authentication mode to 802.1X authentication.
enable: Enables the access authentication mode of WPA authentication.
disable: Disables the access authentication mode of WPA authentication.
Defaults
No access authentication mode is configured by default.
Command
Mode
WLAN security configuration mode
Usage Guide
The access authentication mode can be configured only after WPA authentication is enabled.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English